How could a lot of people's dung suction trucks suddenly break down? Actually, it's not sudden, and it's just caused by some factor that you neglect, but you don't know it yet. In many cases, we can effectively avoid harmful effects if we can pay attention to these details. Here we will talk about how to reduce the harmful effects in the use of dung suction trucks.
1.Avoiding impurities: For suction trucks working under harsh and complex conditions, first of all, the high-quality auxiliary components, lubricants and grease should be used to block the source of harmful impurities; second, mechanical protection should be done at the work site to ensure that the corresponding institutions can work normally and prevent impurities from entering the machine in all kinds of work. Repair the defective machine to the normal repair position as far as possible. When carrying out the on-site maintenance, we should also do a good job of protective measures to prevent replacement of parts during the on-site maintenance, and the pollution of the dust and other impurities before entering the machinery.
2. Applicable temperature: When using the suction truck, it is necessary to prevent operation in the condition of the low temperature and the overload, ensure the normal operation of the low temperature preheating stage, make the machine run or work at the required temperature, and not neglect its important role when there were no problems at that time, prevent the machine from running at high temperature, and often check value of the thermometer in the process of mechanical operation. The machine should be stopped and be checked immediately if any problems are found, which can eliminate the problems. For reasons that can not be found for a period of time, it should not be handled without mechanical treatment. In normal operation, attention should be paid to checking the working state of the cooling system. For water-cooled machinery, it is necessary to check before daily work, add cooling water, and regularly clean up the dust on the air cooling system to ensure the unobstructed heat dissipation pipeline.
3. Anti-corrosion: In use, managers and operators should take effective measures to reduce the impact of chemical corrosion on machinery according to local climate conditions and air pollution at that time. The key point is to prevent the chemical composition of rain and air from intruding into the machinery.